PARTS & ACCESSORIES
Replacement Parts & Accessories for Commercial Cleaning Equipment
Replacement parts and consumables support continued operation and whole-of-life planning. We supply brushes, pads, squeegee blades, filters, batteries and wear components for the Gadlee equipment we distribute in Australia, and confirm fitment against the model before supply.
What we supply
- Disc, cylindrical and side brushes
- Cleaning pads and pad drive boards
- Front and rear squeegee blade sets
- Vacuum, solution and dust filters
- Vacuum, brush and drive motors
- Batteries and chargers for supported machines
- Hoses, seals, gaskets and wear components
- Wheels, castors and electrical components
Consumables, wear parts and components — the practical difference
Treating every part as the same kind of purchase is what makes running costs unpredictable. Consumables are planned spending you can budget for by the hour. Wear parts are replaced on condition, usually during a service. Components are occasional, and they are the items where availability decides how long a machine sits idle.
Sorting your parts spend into those three groups makes it far easier to decide what to hold on site, what to order as required, and what to raise with us before it becomes a breakdown.
| Group | Typical items | How it is usually bought |
|---|---|---|
| Consumables | Pads, brushes, squeegee blades, filters | Planned, replaced on condition or hours |
| Wear parts | Hoses, seals, gaskets, castors, deck skirts | Replaced during scheduled servicing |
| Components | Vacuum, brush and drive motors, batteries, chargers, electrical parts | Ordered as required, model-specific |
How fitment is confirmed
Cleaning machines of a similar size often use visually similar parts that are not interchangeable. Rather than have you guess from a picture, we work from the machine itself.
- Send the model number from the machine's data plate — for example GT55, GT85+, GT110+Pro or GTS1900
- Add the serial number where it is legible, as running changes affect some components
- Include a photograph of the worn part, and of its mounting where it is not obvious
- Tell us the brush or pad grade currently in use, and the floor surface it runs on
- We confirm the correct part, quantity and any related items before supply
Requesting and receiving parts
Send the details through the parts request form, or call the office and quote the model. We come back with the correct component and what is involved in supplying it. Where a part is not something we hold for that model, we say so rather than substituting something approximate.
Parts enquiries and supply are handled Australia-wide from our Fairfield NSW head office. Delivery timing depends on the item and your location, and we confirm it with you before you commit — we do not publish blanket delivery promises.
Consumables worth holding on site
Common consumables can interrupt a cleaning shift when no replacement is available. A site-specific holding may reduce that disruption; follow the machine manual and training when fitting operator-replaceable items.
- A spare set of front and rear squeegee blades per machine
- Replacement brushes or pads in the grade you actually use
- A spare vacuum or dust filter for each machine
- For multi-machine sites, standardise grades so one holding covers the fleet
Accessories that change how a machine performs
Brush and pad choice depends on the floor surface, soil and cleaning task. Squeegee blade material and condition should also be matched to the surface and required drying result. Where an accessory is available for your machine, we will explain its intended application and confirm compatibility.
Parts and whole-of-life cost
Assess purchase price, operator time, consumables, parts, servicing and downtime using your site's operating hours and quoted costs. Serviceable design and access to compatible parts are relevant to that whole-of-life assessment.
The total cost of ownership guide sets out how purchase price, labour, consumables, parts, servicing and downtime add up over a machine's working life.
Common questions
- How do I identify the part I need?
- Start with the model number on the machine's data plate, add the serial number if it is legible, and send a photograph of the worn part. We confirm the correct component before supply.
- How often do squeegee blades need replacing?
- It depends on floor surface, debris and hours in service. Inspect them when streaking or poor pickup appears, then rotate or replace them as permitted by the manufacturer instructions. Also check adjustment, debris, hoses and recovery components.
- Can I get parts for a machine I did not buy from you?
- Send the model and serial details and we will advise what we can supply for Gadlee equipment.
- Do you supply batteries and chargers?
- We supply batteries and chargers for supported machines. Send the model and the current battery configuration and we will confirm what suits that machine.
- Can I standardise consumables across several machines?
- Often yes, where machines share deck or squeegee formats. Send the models you run and we will tell you where a common grade or blade set can cover more than one machine.
Need a replacement part?
Send your machine model, serial number and a photograph of the part. We will confirm the correct component before anything is supplied.